HY2000 30 Watts
The ILP HY2000 Power Amplifier is a fully encapsulated high quality power amplifier with Integral heatsink.
By selecting the appropiate mains transformer and the programming link on the PCB the amplifier can be used with 4 or 8Ω loads with the automatic adjustment of input sensitivity.
Mounting can be achieved by the use of T-slots in the heatsink and the nuts and bolts provided.
Typical Specifications
| Parameter | Value |
|---|---|
| Output Power | 40W rms. Max |
| Frequency Response (-3dB) | 15Hz - 50kHz |
| Total Harmonic Distortion @ 1khz | 0.005% |
| Signal to Noise Ratio (DIN AUDIO) | 100db |
| Slew Rate typical | 10V/µS |
| Rise Time | 5µS |
| Input Sensitivity | 500mV rms. |
| Input Impedance | 100KΩ |
| Damping Factor(8Ω @ 100Hz) | >400 |
| Load Impedance (programmable) | 4 or 8Ω |
| Maximum D.C. rails (8Ω load) | ±30V |
| Size Width x Height x Extrusion Cut | 76x75x30mm |
| Weight | 170g |
Features
- Programmable 4 or 8Ω operation
- Enhanced specifications
- Anti-thump Circuitry
- Integral heatsink
- Thermal Protection
- PTH Circuit Board
- Encapsulated
Power Supply Requirements
ILP have developed a range of Hi-Fi quality Low noise Audio Power Toroidal Transformers for the HY2000 they are Low Profile with Resin filled centres for maximum noise absorption and ease of mounting. Finished in black to match the amplifiers these transformers are the ideal choice to power the HY2000.
| Mode | Transformer | RMS Supply Voltage | Size | Weight |
|---|---|---|---|---|
| 4Ω | AT0304 | 16 - 0 - 16v | 90x34mm | 0.9Kg |
| 8Ω | AT0308 | 20 - 0 - 20v | 90x34mm | 0.9Kg |