HY1420 20 Watts
The ILP HY1420 Power Amplifier is a fully encapsulated high quality power amplifier with integral heatsink, it is designed to run off a single nominal 12 volt supply.
The Amplifier operates in Bridge Tied Load (BTL) mode to achieve a higher power output.
Mounting can be achieved by the use of T-slots in the heatsink and the nuts and bolts provided.
Typical Specifications
| Parameter | Value |
|---|---|
| Output Power | 20W rms. Max |
| Frequency Response (-3dB) | 40Hz - 20kHz |
| Total Harmonic Distortion @ 1khz | 1.0% @ 20W |
| Total Harmonic Distortion @ 1khz | 0.3% @ 10W |
| Supply Voltage Rejection | 50dB | Input Sensitivity | 200mV rms. |
| Input Impedance | 100KΩ |
| Load Impedance | 4 - 8Ω |
| D.C. Supply Voltage | 8-18V |
| Size Width x Height x Extrusion Cut | 76x75x30mm |
| Weight | 170g |
Features
- Output short circuit protected
- No external components
- Reverse polarity safe
- Thermal Protection
- Integral heatsink
- Encapsulated